1, if you find that the mouse cursor does not move wireless charger mouse , please check the computer configuration Wireless charging bracket mouse , open the battery cover, power off the battery for a few seconds, and reinstall the battery; Today, many wireless mice in order to save battery life, do not use the wireless charging stand mouse state will be standby, every time the wireless charging stand mouse time to shake a few times can be restored to the working state. If you do not use the mouse for a long time, it may be dormant.
2, Infik Bluetooth mouse is divided into battery and rechargeable, battery please first put the 5 battery included with the mouse. The charging model can be charged for 5-10 minutes. Insert the Bluetooth receiver with USB port in the mouse into the computer, if it is a laptop with Bluetooth function. Boot according to the instructions, turn on the Bluetooth function of the computer and pair it. After the pair is successful, it can be used normally.
3, find a visible button at the bottom of the mouse, press the button to turn on the switch of the mouse, wait a few seconds, the mouse will automatically connect to the computer. How to connect using Bluetooth: Find "Settings" or "Control Panel" in your computer's operating system and turn on the "Bluetooth Settings" option.
4, alsoFor years. This is because the power consumption of the mouse during use is very weak, and many wireless mice are now equipped with power-saving features that can automatically go to sleep when not in use, thereby extending battery life.
Wireless mouse charge more than 1 hour, can be used for several months. It can be charged for a longer time without using the mouse, and the battery can be fully charged for more than 3 hours. When the battery is fully charged, it automatically stops charging.
Read the instructions! Usually between 30 minutes and 5 hours! However, a wireless mouse of good quality can be reached after charging for an hour in generalTo the effect of full power, so in the process of using the mouse at ordinary times, we must pay attention to the correct way to use it in a fully charged state, so as to better extend its service life and length.
Charging time for wireless mice varies by brand and model. Some rechargeable mice usually take 1-2 hours to fully charge. However, some mice may take longer to fully charge. In addition, if the mouse battery has aged, the charging time may also become longer. Some wireless mice use LED lights or other indicators to show the battery status. When the mouse battery is lowThe indicator may blink or turn red.
Wireless charging mouse 10 hours not full is not normal. The normal wireless charging mouse only needs to be charged for an hour to be fully charged, and the wireless mouse is a lithium battery. The wireless mouse lithium battery is 800mAH, charging for an hour can be, so the wireless charging mouse is not full for 10 hours.
Blue classic wireless game mouse is to support microUSB interface charging, about 5 hours full, and support side by side, no additional purchase of batteries, full state can be used for 25 days, battery life is very notWrong.
Wired connection mode: Using the included USB charging/data cable, connect the USB-C end of the cable to the USB-C port of the mouse, and connect the USB-A end to the USB-A port of the computer to use the mouse in wired mode. 4G wireless connection mode: Press the arrow at the bottom of the mouse's wireless USB receiver storage bin cover to open the bin cover.
Plug in the receiver of the Logitech wireless mouseBrain, usually found on a USB port. Download drivers Download and install Logitech drivers on your computer, this step can usually be found in the video tutorial on the official website. Turn ON the mouse Flip the Logitech Wireless mouse switch to the "ON" position and wait for the indicator at the bottom of the mouse to light up. If the indicator is blinking, hold down the Sync button at the bottom of the mouse for three seconds until the indicator is steady on.
① First install the battery into the wireless mouse. ② Then cover the battery. ③ Then turn on the wireless mouse switch. ④ Finally, insert the receiver into the usb port of the computerMHM. This operation is completed, and our computer is successfully connected to the wireless mouse. To connect the wireless mouse to the computer, you need to take out the connector on the back of the mouse, connect it to the usb port on the computer, and then switch the mouse to ON.
How to connect, first turn the assembled wireless mouse over 180 degrees, there is a small switch on the top, swipe to the right to plug the USB interface into the computer, you can operate the computer.
First put the battery into the wireless mouse 4102 mark 2 and then close the cover of the battery 1653 3 then turn on the switch of the wireless mouse 4 and finally receiveThe device can be inserted into the usb interface of the computer so that the operation is completed, our computer is successfully connected to the wireless mouse.
1, wireless mouse charging methods include the following: using a charging line charging: First, find the wireless mouse charging interface, usually located at one end of the mouse. After confirming the position of the port, turn on the mouse and insert the charging cable. When the mouse starts charging, the indicator light will light up, indicating that it is charging. Do not turn off the power switch of the mouse while charging. After charging is complete, refer toThe indicator will change from red to green, indicating the end of charging.
2, wireless mouse how to charge the first way is to use a charging line to charge. First of all, you need to find the charging hole of the wireless mouse, and generally the charging hole will be at the front of the wireless mouse. You can look for it carefully. After finding, you need to turn on the wireless mouse, insert the mouse charging cable into the jack, and then directly start charging. When the mouse starts charging, the mouse light will light up, indicating that it has started charging.
3, find charging hole wireless mouse is rarely charged, before charging to find the wireless mouse charging hole, in generalThe charging hole of the wireless mouse is at the very front of the mouse. Check whether there is a charging hole of about 1cm at the very front. Insert the charger to adjust the switch at the bottom of the wireless mouse to ON, and then use the mouse charging cable to insert the front jack of the wireless mouse, and the other end of the jack should be inserted into the electrical jack such as the strip.
4, wireless mouse charging method using charging line charging, battery replacement, etc. Charging with a charging line: First of all, you need to find the charging hole of the wireless mouse, generally speaking, the charging hole will be at the front end of the wireless mouse, you can carefully look for it, so that you can charge it well. If you can't fill itElectricity, then it proves that there is a certain problem with the wireless mouse, so disassemble and check the line or chip.
5, the use of charging base: Some high-end wireless mice are equipped with a special charging base, by placing the mouse on the charging base can be charged. This is the easiest and most convenient way, just connect the charging dock to a power outlet. When the mouse is not in use, it can be placed on the charging stand to keep it fully charged. Use a charging cable: The wireless mouse is equipped with a removable battery cover that can be charged using a charging cable.
6, here is a simple tutorial: FirstFirst, find the charging port on the mouse, which is usually located on the side or back of the mouse. Next, turn the mouse on and plug the charging cable into the charging port to start charging. Once the mouse starts charging, the indicator light usually lights up to indicate that charging is underway. During the charging process, ensure that the power switch of the mouse is not turned off. Follow these steps and you'll be able to easily charge your wireless mouse.