1. Wi-Fi may not work after your phone is charged.
2. Reason explanation: The function of Wi-Fi is not directly related to the phone bill. Recharge your phone just to pay for communications, while Wi-Fi is a form of wireless Internet connection that often relies on a nearby wireless router or hotspot.
3. Content extension: If you can't use Wi-Fi after charging your phone bill, it could be one of the following reasons:
- Wi-Fi switch not turned on: There is a Wi-Fi switch on the phone, which enables or disables Wi-Fi functionality. Make sure your Wi-Fi switch is on so you can search for and connect to nearby Wi-Fi networks.
- No available Wi-Fi network: Even if your Wi-Fi switch is turned on, you will not be able to connect if there is no available Wi-Fi network nearby. Check to see if there is a Wi-Fi network available nearby, or try looking in another location.
- Router issues: If there is an available Wi-Fi network nearby, but you still can't connect, it may be due to router issues. Try restarting your phone and router, or contact the technical support department of your network carrier or router for further assistance.
- Authentication or password error: Some Wi-Fi networks may require you to authenticate or enter a password in order to connect. Make sure the password you entered is correct and check if any other authentication is required.
If you have tried the above methods and still can't resolve the problem, it is recommended to contact the phone manufacturer's customer support or talk to your network operator, they can provide a more specific solution or help you resolve the problem.
The first thing to rule out is that you haven't paid enough for your phone and your phone is still in arrearage.
The second thing you need to check is that the power supply to your home broadband is working.
The third point is to see if the router is working properly. You can disconnect the power in each plug of the router and try it again.
1) WiFi signal is set to hide, you need to contact the network management to obtain the wireless signal name, on the mobile phone 【 Settings 】-【 wireless LAN 】-【 other networks 】, manually enter the wireless signal name and password to connect.
< br >
2), the router is faulty, try to restart the router.
< br >
2, indicating that the connection to WiFi is rejected, the fault phenomenon: others can connect, they can not connect to WiFi, the connection is rejected. The solution is as follows:
< br >
1) Wireless MAC address filtering may be enabled on the router. You are advised to contact esight to add the MAC address of the mobile phone. The MAC address can be viewed in \"Settings\" - \"About this machine\".
< br >
2), the router is faulty, try to restart the router.
< br >
3. The prompt that the phone connects to WiFi is saved, but the connection fails. The solution is as follows:
< br >
1), this prompt for the WiFi signal encryption mode, password or router signal channel has been modified. It is recommended to reset the password and encryption type of the router that connects to the terminal of this network
one
If you do not restart the phone after upgrading to 4G plan, you cannot use the Internet function normally.
two
Check whether there is a network, it is recommended to use in a place with strong signal.
three
Check whether the account has phone charges, if the balance is insufficient, you need to recharge before use.
four
After 3 to 5 minutes, restart the phone and try again.
five
Check whether the USIM card is plugged in, if it is plugged in but still cannot be used, it is recommended to check at the business hall