In general, if the charging treasure is not charged, you first need to check whether there is a problem with the charging treasure, charging cable and charging interface. You can try to replace a new charging bank, charging cable, or clean up the charging interface according to the specific situation. If the above methods can not solve the problem, it is recommended to contact the after-sales service center of Pinsheng to obtain professionalInspection and repair services.
Pin-sheng charging treasure hibernate to charge the charging treasure for two hours so that it will release the dormancy state, charging treasure charging method is: charging treasure is actually used for emergency batteries, can be used for mobile phones and other digital products in time. Charging treasure can be divided into two kinds with plug and without plug, the charging treasure with AC plug can be charged in the place where there is a jack, for the charging treasure that needs a data cable to charge, generally use the original data cable to charge the charging treasure.
Maybe the battery has not been used for a long time. The battery has a maintenance period, and the nickel-metal hydride battery can be fully chargedWire mismatches, power adapter problems, etc. Interface problems: The input interface of the charging bank may be damaged, deformed, worn or dirty, resulting in poor contact, affecting charging. If you try to clean the interface, you may need to repair or replace it.
2, first of all, if the charging treasure itself is faulty, it may lead to failure to charge. For example, the battery inside the power bank may have been damaged, or there may be a problem with the charge control circuit. These problems need to be detected and repaired by professionals, if it is the problem of the charging treasure itself, it may need to be replaced with a new charging treasure. Second, the charging cable may also be a guideOne of the reasons why it can't be charged.
3, according to your description, to ensure the stability of your mobile phone data, it is recommended that you use the original charger.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center position of the phone is set to none during chargingLine the center of the charging base, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
The power supply is faulty. The battery of the charger is too low or the machine fails, you canConnect the charger to the power supply and charge it again. Poor contact. If the charging device is in poor contact with the charging base or the interface is dirty, use a soft cloth to clean the metal contact points on the charger and charging device. The power supply does not match. If the charger and the power supply do not match, it will lead to insufficient power and cannot be charged normally.
Please check whether the connection between the wireless charger, charger, data cable is normal, do not place metal objects between the phone and the wireless charger, such as: magnets, magnetic cards, etc., such items will affect the wireless charging. Different brands of models due to the difference in coil position, may lead to charging efficiencyLow or unable to charge, please put the mobile phone wireless charging area correctly in the wireless charger sensing area to try.
iphone12magsafe does not charge this problem many people are reflecting, in fact, because magsafe wireless charging is too slow, leading many people to think that it can not be charged, if you play with the phone while charging, it is basically the same as no charge, so the magsafe charger effect is not much, not worth buying.
Possible problems or anomalies: However, a flashing green light may also indicate that some problems or anomalies have been encountered during charging.For example, if the connection between the charger and the device is poor, or if there is a charging problem with the device itself, the green light may flash to alert the user. In addition, if the power supply of the charger is unstable or there are other faults, it may also cause the green light to blink.
Pin-sheng charging treasure hibernation charging treasure for two hours so that it will release the hibernation state, charging treasure charging method is: charging treasure is actually used for emergency batteries, can be used for mobile phones and other digital products in time. The power bank can be divided into a plug and noThe two kinds with plugs, the charging treasure with AC plug can be charged in the place where there is a jack, for the charging treasure that needs a data cable to charge, the original data cable is generally used to charge the charging treasure.
Intelligent hibernation of the charging treasure should mean that the charging treasure enters the charging protection state. To release the charging protection state is to activate the charging bank. When the charging bank process or voltage is too high, the charging bank will enter the charging protection state, so as to protect the battery from accidents. At this time to charge the power bank is not full. Plug the power bank into the USB port of the computer and charge it for about 2 hoursCharging protection status.
Generally a data line can be inserted. Check whether the charging treasure has power, turn on the charging treasure switch and observe the signal light. If there is power, the charging treasure will light up. If the charging treasure has power, connect the mobile phone to the charging treasure with the data cable, and then the charging treasure can be fully charged with the charger without power.
The hibernation state of the power bank is to protect the battery of the power bank. When the power bank is not used for a long time or is overused, it will enter the hibernation state. First, take out the charger and connect the data cable to the charging bank. Once the charger is connected, plug it inCharge it, and then charge it for two hours to activate it. After the charging bank is activated, it can work normally, and then you can charge your phone.
The charging bank can be activated by charging for a long time. Lithium batteries are usually used inside the charger, and if not used for a long time, the battery may enter a hibernation state and the performance will decline. At this point, the battery activity can be restored by charging. Choose the right charger: Charge with the charger that matches the power bank. Mismatched chargers may lead to inefficient charging and even damage to the charging bank.
Two hours full charge1 Reason for hibernation: When the charging bank is not used or overused for a long time, the low power will enter the hibernation state, which plays a role in protecting the battery. 2 You only need to charge the power bank for two hours to activate the power bank, but it is best to use it fully charged.
Try to replace another wireless charging base to charge the phone and determine whether the fault is the fault of the mobile phone or the wireless charger. The non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging functionYou are advised to use Huawei's official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
Different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try. Please do not use too thick or magnetic insulation material/metal material protective case, these protective cases may affect the charging efficiency or can not be charged, and even overheating can cause the phone to be unable to charge or damageBad.
Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances may interfere with the normal operation of the wireless charging function.