1. Open the screen of MateBookEgo and make sure that the keyboard and trackpad are folded to the back. In the bottom right corner of the screen, locate and tap the Notification Center icon on the taskbar. In the Notification Center window that pops up, locate and click the "Tablet Mode" option. Click Yes to confirm the switch to tablet mode. Department ofThe system automatically adjusts the screen layout and touch mode to fit tablet mode.
2, the price of the ordinary version is lower than the performance version, and the relative cost performance is higher. The performance version of the chip is a grade higher than the ordinary version, so the experience and actual performance are stronger than the ordinary version. The thermal design of the performance version is better than that of the ordinary version. matebookego features introduction. Despite the positioning of mobile office productivity tools, appearance level and appearance design are still of concern.
3. First, ensure that the Huawei MateBook E Go is turned on. Then, findGo to the "Separate" key or similar button on your keyboard. This key is usually located at the top or side of the keyboard, and has a distinct icon indicating separation or unlocking. Press the "Disconnect" key, and the keyboard will be separated from the screen portion. At this point, the screen portion will be used as a standalone tablet.
4, officially announced that Huawei MateBook E GO performance version will be officially listed at 10ego wireless charge : 08 this morning, the price of 16GB 512GB configuration was originally 5499 yuan, but the first discountBookEGo can choose up to 16GB 512GB high-speed solid-state drive combination, to meet the ordinary light office needs, the heat is relatively low. Equipped with 48Wh battery to support 65W fast charge, it takes 30 minutes to charge from 0% to 50% in the off state, and it takes about 100 minutes to charge to 100%.
The first time the notebook battery in the ego wireless charge is completely used up, and then shut down and charge for more than 12 hours, preferably about 14 hours. Only the first charge needs to flush the ego noneLine charge time is long, every time in the future is full, now the notebook is a perfect power management circuit and charge management system, charging time is too long, which will lead to high heat when charging, will cause explosion and other phenomena.
In terms of battery life, the Huawei MateBook E Go has a battery capacity of 46Wh and a charging power of 65W. If used only for video playback, it can last up to 14 hours and up to 7 hours. Office hours. Laptop battery life is pretty good. Huawei MateBook E Go network experienceWhat's the boost to ego Wireless charging ? The Huawei MateBook E Go also focuses on enhancing the network and battery life experience.
You this one is a tablet, a notebook, the difference is very big, tablet is also convenient, but the performance of the computer is obviously stronger summary of Huawei matebooke and matepad pro differenceAsk you this one is a tablet, a notebook, the difference is very big, tablet is also convenient, but the performance of the computer is stronger
appearance is different, matebooke screen 16 inches, is 2 in 1 notebook, matepadpro screen 8 inches, thinner, is a tablet computer, so it will be more convenient to carry.
Differences between Huawei matebooke and matepadpro Appearance First of all, matebooke is a 2-in-1 notebook, while matepadpro is a tablet. The matebooke screen is 16matepadpro is 8 inches, matepadpro is more thin and portable. matebooke uses Windows, while matepadpro uses HarmonyOS.
Looks and systems different. The Huawei matebookego has a 16-inch screen and the matepadpro has an 8-inch screen, so the two look different. Huawei's matebookego runs on windows and matepadpro runs on HarmonyOS, so the two systems are different.
Huawei mThe differences between atepad and matepadpro are as follows: Processor. HUAWEI MatePad Pro uses Huawei hisilicon Kirin 990 processor, which is the flagship processor in Huawei's current products. HUAWEI MatePad uses the Huawei Hisilicon Kirin 810, the sub-flagship processor of Huawei products in 2019. In terms of processors, the Kirin 990 processor is undoubtedly better. The Internet.
May be caused by accidental system failure, force shutdown and plug and unplug the charger before trying again. Hold down the power button for 10 seconds to force power off, and then plug and unplug the charger once to reactivate the computer charging system. If the fault persists after the preceding operations, back up the data in advance and go to a nearby Huawei customer service center with the purchase certificate and computer.
The MatePad Pro keyboard could be dead because of a dead battery or a hardware failure. Battery drained: The MatePad Pro keyboard is powered by a built-in rechargeable batteryIt's electric. When the keyboard is used for a long time or is not charged in time, the battery will run out, resulting in the keyboard cannot work normally. At this point, you need to connect the keyboard to the power supply for charging.
One side of Huawei tablet matebookego can not be charged because the charging port is broken, and it can not be charged. You can take it to Huawei authorized service center for after-sales repair, and replace the charging port.
You can check the power cord and charger through other devices to check the problem, if you are sure that there is no problem, then it must be the charging jack of the tablet.In need of repair.
The Huawei stylus cannot be charged for a long time because the battery is in hibernation state or the battery is damaged. The battery goes to sleep: When the battery has not been used for a long time, it may enter a kind of sleep state to save power. In this case, even if the charger is connected, the battery may not start charging immediately.
The charging port is damaged or loosened due to excessive force during insertion and removal. Adapter failure: A problem with the adapter used by the notebook may also affect the normal charging power. Check whether the adapter has obvious damage, such as fracture, deformation, etc.Can be replaced with a reliable adapter in good working condition. Low-quality or aging batteries: The Huawei MateBookx has been in use for some time, and its built-in lithium-ion batteries will age.
You can determine the cause of the problem in the following ways: 1, please confirm whether there is a charging icon If your tablet has been turned on, but there is no charging icon after connecting the charger, please check the connection of the charger and cable, pleaseBefore charging the tablet, ensure that the charging interface is clean and the port connection is stable. If it still cannot be charged, it is recommended that you replace the charger/data cable and try again.
Recommended Charging using standard charger It is recommended that you use the standard charger and charging cable of the tablet to charge. Non-standard chargers and data cables may not be compatible with the tablet, resulting in the tablet not being able to charge. 2, please check whether the charging interface is abnormal Check whether the flat charging interface is blocked by foreign matter, mildew, corrosion, internal connection damage, etc. If there are such phenomena, it is recommended that you go to the nearby customer service center for cleaning and testing.
The Huawei matebookego keyboard cannot be charged and the typec interface is inserted. Huawei keyboard magnetic can be charged on the tablet, the keyboard is no battery, can only be powered by the tablet. To charge the keyboard, you need to insert the charging cable of the typec interface into the charging port on the right side of the keyboard, and switch on the power to charge.
The tablet is not charged or the more it is charged, generally because the current input of the charging device is not enough to offset the electricity consumed by the phone itself. If a Huawei tablet is used, rectify the fault as follows: The original charger and data cable are not usedLine charging. Please confirm whether there are foreign objects in the data cable interface or the tablet charging jack, or whether the interface is loose and has poor contact.
1, the charging method of electronic cigarettes varies by brand and model, but it is usually charged through the USB interface. An e-cigarette is an electronic device that is powered by a battery, so it needs to be recharged after a period of use. Generally speaking, the charging interface of e-cigarettes is a USB interface, which means that you can use a computer, mobile phone charger or other USB powerSource adapter to charge the e-cigarette.
2, the first step, first find the charging socket, ready to charge the electronic cigarette. The second step, the newly bought electronic cigarettes need to be charged for a day to ensure sufficient electricity. The third step is to ensure that the battery is charged for 3 hours every day so that the battery can be better protected. When charging, remember to plug in the power supply and look at the method on the manual when using. When the charger indicator light changes from red to green, it means that it is full, please disconnect the charger power supply.
3. Yes. usb charging: Many e-cigarette devices can be charged via the usb port, using the charging cable that comes with it orConnect the usb cable to the computer, charger or car charger. Charger: Some electronic cigarette devices are equipped with a special charging base, and users can place the device on the charging base for charging.
4, after the product is unwrapped, it is recommended that the user should use up the power and charge for 4-8 hours. After each 2 hours or so to replace the new cigarette end, wait for 3 minutes to smoke again, the nebulizer surface no smoke liquid, easy to burn the smoke bomb installed on the nebulizer, the smoke liquid inside has been opened, the user should be used in time to avoid deterioration of the smoke bomb not installed on the nebulizer, the smoke liquid is sealed and stored, the shelf life is1 year.
5, the first time you use the e-cigarette product you need to charge the battery until the charger indicator light changes from red to green. The charging time is about 2-3 hours, until the red light at the front of the cigarette pole is extinguished, which means that the electricity is full, please remove it in time, otherwise it is easy to damage the charger and the cigarette pole! It is recommended to charge the charger for another hour after the indicator light turns green.