Mobile phones do not support wireless charging, Huawei car wireless charger only supports mobile phones that meet the qi wireless charging standard. The charging distance is too far, and the wireless charging distance is generally less than 5mm. Chargers are not compatible with mobile phones, and some in-car wireless chargers only support certain brands or models of mobile phones.
The phone temperature is too high or too low may not be able to charge normally, please ensure that you charge the phone at 0~35℃. You are advised to use the charger and cable recommended by Huawei. Non-huawei chargers and numbersThe cable may not be compatible with the phone, causing the phone to fail to charge or charge slowly.
Reasons why the Huawei car wireless charger cannot be charged: Check whether the charging port is properly inserted and whether the car port is dirty or foreign. Please clean it before charging it. When using the car charger, please turn off the high power consumption application, the power consumption of the system will affect the charging speed.
The reasons for the insufficient voltage of the Huawei wireless car charger are as follows: When the voltage is unstable during charging, the charging does not enter the power supply, and the mobile phone or other smart electronic products generally start the power supply monitoring and detection program. If the program detects an onboard electrical shockCheck whether the indicator is on normally. At the same time, check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert it once.
2, when the mobile phone cannot use wireless reverse charging, please follow the following steps: Please confirm whether the receiving device supports wireless charging function.
3, ①, About the above Huawei P40 mobile phone does not support wireless reverse charging.
4, the phone itself power is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the power is higher than 20%. The battery in the phone itself is lowerAt 20%, the phone will automatically turn off external wireless reverse charging to ensure the normal operation of the phone itself and a good charging experience. Check to see if there are other substances between the two devices, such as bus passes, metal rings, magnets, built-in metal protective shells, etc., if there are, please remove.
5, if yes, please remove. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected. 5, please align the center position of your mobile phone with the center of the wireless charger during the charging process, please place the center of the mobile phone slightly lower in the center of the wireless charger base, please avoid the mobile phone shift, when the position deviation is largeUnable to charge.
1. If the indicator is off, check whether the connection between the wireless charger, data cable, charger, and power supply is in poor contact. You are advised to reinsert the wireless charger. 3, please take off the mobile phone protective case before charging because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the identification function of the mobile phone wireless chargerPlease take off the case and try again.
2. If you use a Huawei mobile phone that cannot use wireless charging, perform the following steps to check whether the Huawei mobile phone cannot be charged : 1, please check whether the device is connected at the same time Huawei can not charge wireless charging Wired charging device If wired charging and wireless charging are used at the same time, wired charging will be preferred.
3. Try to replace another wireless charging base for charging, and locate the fault of the mobile phone or the wireless charger, not Huawei WirelessThe charger may be incompatible with the mobile phone, resulting in abnormal wireless charging. You are advised to use a Huawei official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
4, please use the original protective shell, do not use too thick or magnetic insulation material/metal material protective shell, these protective shells may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged. If the above methods do not solve the problem, please back up the phone data in advance.Take your mobile phone, wireless charger, wired charger set and purchase voucher to vivo customer service center for testing. 5, the mobile phone does not have the function of the method is as follows: you can buy a mobile phone case that supports wireless charging, and install it on the mobile phone, the advantage of this method is simple and convenient, there is no need to replace the mobile phone or remove the internal phone, the disadvantage is that it may increase the weight and thickness of the mobile phone, as well as affect the heat dissipation and signal of the mobile phone.
1. Huawei p40 has no wirelessCharging function. Huawei p40 mobile phone does not support wireless charging function (including wireless reverse charging) Huawei does not support wireless charging , only supports up to 25W Huawei wired fast charging. In the same series, only Huawei P40Pro and Huawei P40Pro support 40W Huawei Super wired fast charge, 27W Huawei Wireless Super fast charge, which supports wireless reverse charging. The Huawei p40 is compatible with 5V/5A or 5V/5A super fast charge, and is compatible with 9V/2A fast charge.
2, Hello, Huawei p40 mobile phone does not support wireless charging function If Huawei cannot charge wireless , you need to use a charger for wired charging.
3, because Huawei P40 mobile phone does not support wireless charging function (including wireless reverse charging), only support up to 25W Huawei wired fast charge. In the same series, only Huawei P40Pro and Huawei P40Pro support 40W Huawei Super wired fast charge, 27W Huawei Wireless Super fast charge, which supports wireless reverse charging.
1Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
2. The specific reasons are as follows: Check whether a wired charging device is connected at the same time. Check the connection of the wireless charger, between the charger, data cable and wireless chargerThe connection is normal.
3, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
4, Huawei mate50 wireless charging is always broken. Mobile phone wireless charging disconnection can be caused by a variety of reasons, such as the phone temperature is too high. Charging base, data cable, chargingPoor contact between device and power supply. The phone is not placed in the center of the charging base. There are other items between the phone and the charging dock.
The reason why mate30 can not be wireless charging: the wireless charging base indicator is not bright, please check whether the connection between the charging base, data cable, charger and power supply is in bad contact, it is recommended that you re-plug it. Is there anything else between the phone and the wireless charging base? If so, please remove it. There is noLine charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected. If the phone is out of position, it will not be able to charge.
If your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
When the mobile phone cannot use wireless charging, please follow the following steps: 1, please check whether it is the sameIf wired charging and wireless charging are used at the same time, wired charging will be preferred.
In the Settings of Huawei mate30, select Battery and then Wireless Charging. In the wireless charging option, turn on the switch to enable the wireless charging function. By following the above three steps, you can easily enable the wireless charging function of Huawei mate30. When you don't need wireless charging, just turn off the wireless charging option. The wireless charging function of Huawei mate30 is very practical, which can make you use your mobile phone more convenient.
It is recommended to use the standard charger. It is recommended to use the standard charger and charging cable of the mobile phone to charge. Non-huawei chargers and data cables may not be compatible with the phone, resulting in the phone not being able to charge. If the phone still cannot be charged normally, it is recommended to back up the data in advance (third-party applications such as QQ and wechat need to be backed up separately), bring the phone, the original charger, the original data cable, and the purchase certificate, and go to the nearby Huawei customer service center for testing.