1, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. Using a protective phone case that is too thick may hinder wireless charging, buildDiscuss removing the mobile phone cover and re-charging attempt. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
2, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
3, if your handIf wireless charging is not possible, perform the following steps: Check whether the phone is overheating. It is recommended to charge the phone in an environment with good heat dissipation conditions. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
4, if the indicator is off, please check whether the connection between the wireless charger, data cable, charger and power supply is in poor contact, it is recommended that you re-plug once. 3, please take off the mobile phone protective cover before charging because some mobile phone protective cover is too thick, or mobile phone insuranceThe material reason of the sheath may affect the identification function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective case and try again.
5, Apple mobile phone can not be charged for a variety of reasons, such as the data cable and charging port contact problems, poor contact will also lead to no charge. The data cable does not match, Apple's data cable must be certified by Apple to charge, the solution is as follows: Method 1: Because we are used to putting the phone in the pocket, the charging interface at the bottom of the phone is easy to enter the gray, which causes the interface to have poor contact with the power cord plug.
6, the charging indicator light has been flashing red,After disassembling the phone, you can turn off the phone and remove the battery, use a cotton swab to clean the battery contact and the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
3, you want to ask is Samsung watch wireless charging did not respond to what is going on? The reason why this charging does not respond is as follows: check whether the direction of the watch is loaded into the base is correct, the charging end of the watch back should be fitted with the charging end of the base, if the installation is reversed, it cannot be charged. Replace other data cable, charging head charging attempt. If the problem persists, it is recommended to bring the machine, purchase invoice, and bagRepair the card to the local Samsung after-sales service center for testing.
1, does the question want to ask "Samsung watch5 wireless charging did not respond"? First check the Samsung watch5 battery for poor contact. Second, check whether the Samsung watch5 is connected to wireless charging. Finally, go to Samsung watch5 official repair shop for professional testing and repair.
2, please check whether the back center of the phone is placed in the center of the wireless charging board. Mobile phone with wireless chargingWhen there are inclusions between the plates, it may not be able to charge properly. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
3, you want to ask is Samsung watch wireless charging did not respond to what is going on? The reason why this charging does not respond is as follows: check whether the direction of the watch is loaded into the base is correct, the charging end of the watch back should be fitted with the charging end of the base, if the installation is reversed, it cannot be charged. Replace other data cables and chargeElectric head charging attempt. If the problem still exists, it is recommended to bring the machine, purchase invoice, repair card to the local Samsung after-sale service center for testing.
4, if the wireless charger can not charge the phone, please try: use the original charger and data cable to connect the power to charge. For mobile phones with removable batteries, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
5, use the original charger to connect to the home power supply. Replace the electrical outletTry or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the nearest service center for inspection.
First use the data cable to reinsert the charging port of the phone to charge it normally, and then pull out the dataLine and observe whether the charging state can be removed normally. If not, it may be that the tail plug of the phone has a short circuit, causing the phone to incorrectly display the charging state, you can shut down, and then clean up the dust and impurities in the charging port, and then start up to return to normal.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If usedNon-original charger, may lead to normal charging situation.
Use the original charger and data cable to connect to the power supply. For mobile phones with removable batteries, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone case used is too thickWill hinder wireless charging, it is recommended to remove the phone cover to try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
If the phone cannot be charged, it is recommended to check and handle the following steps: Use the original charger to connect to the home power supply for charging. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings.
. It is recommended that you use the standard charger and charging cable for charging. Such asIf your phone is not used for a long time, or the phone is not charged in time after the low power shutdown, the battery may be over-discharged, it is recommended that you connect the charger and charge for more than 30 minutes to see whether the phone has a reaction.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the random SamsungOriginal charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
Samsung S6 wireless charger, must be placed accurately, because the use of QI technology, the transmitter coil and the receiving coil are relatively small, not almost only 1/3 of the size of the phone, so a slight mismatch, you can not charge. It is also for this reason that Samsung's wireless charging mobile phones, or other similar QI wireless chargers, have not been promoted.
Shutdown charging test. Change chargeElectrical position, exclude the plug caused by poor contact intermittent lead if conditions allow replacement of the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
The main reasons for the S6's inability to fast charge are as follows: Poor connection for non-original chargers and data cables that do not open the fast charge option software version that causes the hardware failure of the phone itself. You can perform the following operations to try to fast charge: Confirm whether the charging cable and the charging head are plugged in to the end, if not fully inserted, the fast charging effect cannot be achieved. Check and useWhether the original charger, charging cable.
Samsung s6 can not be charged, please first confirm whether the machine in the case of low ambient temperature, in order to improve the durability of the battery, charging may be limited in the low temperature environment, which is a normal phenomenon. It is recommended to charge the machine in a warm environment (recommended ambient temperature: 15℃-35℃). If it still cannot be charged normally, it is recommended to use the original charger to connect to the home power supply to charge.
Reinstall the battery and try charging it again. 2) If possible, replace the battery or use a charger to try charging. If mobile phones canYou are advised to back up data (such as contacts and multimedia files) in the phone and restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging board Samsung vertical wireless charging can not be charged ,May not charge properly. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
None of Samsung S6The wire charger must be placed accurately, because the QI technology used, the transmitting coil and the receiving coil are relatively small, not almost only 1/3 of the size of the mobile phone, so a slight dislocation, there is no way to charge. It is also for this reason that Samsung's wireless charging mobile phones, or other similar QI wireless chargers, have not been promoted.
S6 can not fast charge the main reasons are the following Samsung vertical wireless charge can not be charged : poor connection for the use of non-original charger and data cable did not open the fast charge option software versionThe hardware failure of the mobile phone itself can be carried out the following operations to try whether fast charge Samsung vertical wireless charge can not be charged : Confirm whether the charging line and the charging head are inserted in the end, if not fully inserted, can not achieve fast charging effect. Check whether the original charger and charging cable are used.