1, protection, millet wireless recoil is your phone in the case of sufficient power, if your phone power is low, the phone recoil function will automatically turn off to protect your phone, so in the absence of an emergency, this function as far as possible not to use, because it will also affect the phone batteryThe service life.
2, Mi 12 for wireless charging automatic shutdown started the protection function. When Xiaomi mobile phone is wireless charging, if the recurrence period produces a large current or short circuit, the Xiaomi mobile phone will automatically power off, so as to avoid injury to the mobile phone, and the protection function will be activated when the wireless charging automatic power off.
3, there is a fault. Reverse charging is that your mobile phone can charge other mobile phones wirelessly; Open the phone manager on the phone interface, click and enter, after entering, find battery and performance and open, find power management on this open interface, and enterClick the power saving Settings, turn on the power saving Settings Click the wireless reverse charging button to turn on, after opening, you can wireless charge other mobile phones.
4, reverse charging always automatically turn off possible causes and solutions: the phone itself is less than 20%. In order to ensure the normal operation of the phone itself and a good charging experience, the phone will automatically turn off the external wireless reverse charging function when the phone battery is less than 20%. At this time, you need to use the charger to charge the phone, and then wireless reverse charging after the power is higher than 20%. Obstacles exist between devices.
5, in the phone itself electricityWhen the amount is less than 20%, the mobile phone will automatically turn off the external wireless reverse charging to ensure the normal work of the mobile phone itself and a good charging experience. The device is not QI certified, there may be compatibility problems, confirm whether the receiving device supports wireless charging function, whether it supports the QI wireless charging protocol. The location of the charged device will affect the charging efficiency, and the farther the location is from the center, the lower the charging efficiency, even beyond the effective charging range of wireless charging.
1, reverse charging always automatically shut downPossible cause and solution: The battery of the phone itself is less than 20%. In order to ensure the normal operation of the phone itself and a good charging experience, the phone will automatically turn off the external wireless reverse charging function when the phone battery is less than 20%. At this time, you need to use the charger to charge the phone, and then wireless reverse charging after the power is higher than 20%. Obstacles exist between devices.
2, Mi 12 for wireless charging automatic shutdown started the protection function. Millet mobile phone in the wireless charging, the recurrence period of large current or short circuit, millet mobile phone will automatically power off, so that the phone can avoid injuryBad, wireless charging automatic power off when the protection function started.
3, protection, Mi wireless recoil is your phone in the case of sufficient power, if your phone power is low, the phone recoil function will automatically turn off to protect your phone, so in the absence of an emergency, this function as far as possible not to use, because it will affect the life of the phone battery.
4, there is a fault. Reverse charging is that your mobile phone can charge other mobile phones wirelessly; Open the phone manager on the phone interface, click and enter, and find the battery after enteringWith the performance and open, find the power management in this open interface, enter the power saving Settings, open the power saving Settings, click the wireless reverse charging button to turn on, after opening, you can wireless charge other mobile phones.
5, when the phone itself is less than 20%, the phone will automatically turn off the external wireless reverse charging to ensure the normal work of the phone itself and a good charging experience. The device is not QI certified, there may be compatibility problems, confirm whether the receiving device supports wireless charging function, whether it supports the QI wireless charging protocol. The location of the device being charged affects the charging efficiency,Mi wireless charger green light has been flashing '> Mi wireless charger green light has been flashing
1, the charger or mobile phone power is insufficient: check whether the charger and mobile phone power is sufficient, if insufficient, please charge in time. Charging interface of charger or mobile phone is damaged: If charging interface of charger or mobile phone is damaged, please contact after-sales service for repair or replacement.
2, millet wireless charger flashing green usually means that it is charging, but there may be some problems or abnormal conditions in the charging process. Indication that it is charging: When the green light on the Xiaomi wireless charger starts to flash, this goes onOften means the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power.
3, the green light of millet wireless charger has been blinking because the charger has detected the automatic protection setting of metal foreign bodies. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check whether there is metal on the back of the phone or metal interference near the charger.
4, off the power and so on for a while, this is not placed in the right position, detected metal foreign bodies, automatic protection SettingsMake sure you use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off. Check to see if there is metal on the back of your phone, or if there is metal interference nearby, such as your "gold" (iron) ring.
5. If the indicator flashes, it indicates that the charging status is abnormal and wireless charging cannot be carried out. The following exceptions may exist: The mobile phone is incompatible with the wireless car charging protocol. The phone does not support wireless charging.
6, first of all, the light of the millet wireless charger will blink when it starts chargingThis is a normal phenomenon. But if the light keeps flashing, it may be caused by the following reasons: The distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose.
The distance between the charger and the phone is too far or there are metal objects blocking, the battery of the charger or the phone is insufficient, and the charging interface of the charger or the phone is damaged. The distance between the charger and the phoneToo far away or blocked by metal objects: Close the distance between the charger and the phone to ensure that no metal objects block it. Low battery of charger or mobile phone: Check whether the battery of charger and mobile phone is sufficient, if insufficient, please charge in time.
Xiaomi wireless charger A green light flashing usually means that it is charging, but there may be some problems or anomalies during the charging process. Indication that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power.
The green light of the millet wireless charger has been blinking because the automatic protection setting of the charger has detected a metal foreign body. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check whether there is metal on the back of the phone or metal interference near the charger.
If the indicator blinks, it indicates that the charging status is abnormal and wireless charging cannot be performed. The following exceptions may exist: The mobile phone is incompatible with the wireless car charging protocol. The phone does not support wireless charging.
1, millet wireless charger flashing green usually means that it is charging, but there may be some problems or abnormal conditions in the charging process. Indication that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power.
2, the distance between the charger and the phone is too far or there are metal objects to block: The distance between the charger and the phone is closer to ensure that there is noMetal objects block. Low battery of charger or mobile phone: Check whether the battery of charger and mobile phone is sufficient, if insufficient, please charge in time. Charging interface of charger or mobile phone is damaged: If charging interface of charger or mobile phone is damaged, please contact after-sales service for repair or replacement.
3, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. Miss timeThe power will be ready in a moment, it is not placed in the right position, detected metal foreign objects, automatic protection Settings.
4, millet wireless charger green light has been flashing because the charger detected metal foreign body automatic protection Settings. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check whether there is metal on the back of the phone or metal interference near the charger.
5, first of all, the light of the millet wireless charger will blink when it starts charging, which is a normal phenomenon. But if the lights keep flashing, it could be for several reasonsCause: The distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose.