1, millet air-cooled wireless charger does not blow air is the reason for poor wireless charging contact.
2, may be the reason for poor wireless charging contact. Xiaomi wireless charger can charge Apple, because the iPhone supports Qi wireless charging standard technology, most of these wireless chargers have Qi protocol.
3, this situation may be the millet charging treasure battery exhaustion or output current is large resulting in protection, it is recommended to charge it first, if the output protection can be excited by chargingLive. There is also a possibility that some of the output components are burned, which is relatively rare.
4, small fan small led can not be used on the millet charger need to check the current. According to the query of relevant content, the charging treasure has current detection, and the load current is too low, it will stop discharging.
5, millet vertical air-cooled wireless charger from the body to the packaging box, all use a new black and gold color, which supports 55W wireless fast charge, 40 minutes can be filled with millet 10 supreme commemorative edition. In addition, the product is equipped with a special bracket and built-in turbofan, which can actively dissipate heat and make the whole wireless charging process warmDegrees are kept at a low level.
The reasons for this situation are: the charger itself, electromagnetic interference, poor contact. The problem of the charger itself: some inferior chargers have not undergone strict quality testing, the internal circuit design is unreasonable, and it is easy to produce noise when working. If the parts inside the charger are damaged, such as inductors, capacitors, etc., it will also produce abnormal sound.
RPM. Charger built-in built-in smart silent fan, smart during the dayAdjust the fan speed and automatically switch the super silent mode at night. The built-in high-efficiency centrifugal fan can increase the air volume by 50%, and the innovative bottom three-dimensional air duct design can dissipate heat not only for the charger, but also for the mobile phone.
If you are conducting wireless charging, because there will be energy loss in the wireless transmission process, and then generate a certain amount of heat, there will be a phenomenon of heat when wireless charging, this is normal.
It is normal for the small fan inside the Huawei wireless charger to keep turning once it is plugged in, because the small fan is used for the power supply of the charger and the chip inside to dissipate heat, so it has beenHold fast charge technology. Look at the output parameters on the charger and see the table below to determine which charging mode your device supports. If your device supports fast charge or super fast charge, but the normal charge icon is displayed when charging, then you can try to use the data cable that comes with the device, because this cable will detect whether the charger and data cable meet the fast charge/super fast charge conditions when charging.
The reasons for the failure to fast charge vary in different cases. You can refer to the following methods when your mobile phone is connected to the charger to charge, the status bar of the mobile phone will display the corresponding charging icon, and the charging interface will have a text reminder of the fast charge mode. makeCharging with a three-way charger: The new version optimizes the anti-counterfeiting protection function of the charger. For non-Huawei Super Fast charger, the charging mode is limited to ordinary charging mode and the single lightning icon is displayed to ensure safe and stable charging.
If your mobile phone cannot enter the fast charge mode, please try to solve it as follows: Please check the output parameters of the charger and the charging mode supported by the device to determine whether it has entered the fast charge/super fast charge mode. Please make sure that your phone model has the fast charge function and the charger you are using supports fast charge. If you cannot confirm, contact Huawei customer service.
NoIn the same case, the reasons for the failure to fast charge vary. You can use the three-way charger in the following ways: The latest version optimizes the anti-counterfeiting protection function of the charger. For non-Huawei Super Fast charger, the charging mode is limited to common charging mode and the single lightning bolt icon is displayed to ensure safe and stable charging. Damage to the charger, aging of the data cable, abnormal charging link, etc. : Check whether the device charger and data cable have obvious traces of damage.
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. Please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Non-Huawei wireless chargers may be incompatible with mobile phones, resulting in abnormal wireless charging function.
Make sure your phone is compatible with wireless chargers: Make sure your phone supports wireless charging and wireless chargersCompatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
Please check whether the wireless reverse charging switch is turned on. The phone Settings are as follows: Set the battery and turn on the wireless reverse charging switch. Please check whether the battery of your charging phone is above 20%Power, wait until the power is higher than 20% and then wireless reverse charging.
1, can not judge. Different chargers have different designs, after power, the fan will turn when there is electricity, and it can not be judged that the charger has a problem. Different chargers, the internal circuit design is different, can charge normally, there is no problem. Without detection, it is impossible to tell what electronic components are damaged inside the charger.
2, pulse repair time. After the charger turns green, the fan is still turning, which is the pulse repair time, the longer the repair time, the better the battery life, there is no need to worry about overcharging, and the time will automatically stop. That is the charger fan circuit failure, the original design is to change the light, the fan immediately stop rotating. Perhaps the temperature of the charger has not come down, and it will not turn after cooling down.
3, normal, the maximum current of the power tube is the maximum when it is cold, and the temperature decreases as the temperature rises.
4, if you are conducting wireless charging, because in wireless transmissionThere will be energy loss during the transmission process, which will generate a certain amount of heat, and there will be a phenomenon of heating when wireless charging, which is normal.
5, this is a very normal situation, the power plug after the fan began to turn, turn for a while and automatically stop, this is INTEL's full reset technology, please see INTEL this function of the motherboard every day for the first time when the power supply, the computer is powered on, and then the power is off, about 3-5 seconds after the automatic power on.
6, a switch on the indicator light, there are two cases, one is set in the bios automatic restartSecond, there is a problem with your computer motherboard. The solution is not much shutdown. Take the battery off, power it on, turn it on. Load the battery. This is to allow power management to find your "new battery" again. For repair.